A Guide To Understand The Frequency Mixing Better

We all come across the term “frequency” so many times in our life. So, the frequency can be defined as the particular point or range where you get to hear the sound or song. It is essential to understand the frequency, especially for the audio engineer to get the perfect mix of vocals and sound. There are numerous music production courses in India that teach and develop your audio skill to become a perfect sound engineer. These courses serve as a guide to understand the frequency mixing better. For now, let us see how frequency plays a vital role in sound engineering and how to mix them perfectly. These tips let you choose the instrument that is apt for frequency mixing. Hence, let us walk through the different frequencies and related properties.

Sub bass (20 to 60 Hz):

The foremost thing that everyone should know is the normal frequency for human ears ranges between 20Hz to 20000kHz. So, the sub-bass range is the lowest audible range in the frequency category. The sun-bass frequency range is rather felt than being heard. So, you can say that sub-bass is a frequency that is heard only through deep listening. Our ears are extremely sensitive to the 1-6 kHz range, whereas human ears are insensitive if the sound ranges below 100 Hz. Thus, the sound below 100 Hz, say the sub-bass should be loud enough which at times makes it feel like vibrating. So, mixing the sub-bass with other frequencies sometimes can make the sound powerful and bigger. Thus, many sound engineering colleges in India suggest using the high-pass filter to reduce or remove the sub-bass range.

Bass (60 to 250 Hz):

Another prime frequency range that is used by every sound engineer is the bass. It is because the bass is the basic frequency range for every sound and vocal. The complexity in the bass range is that too much intense frequency can make the sound overpowering while removing this range makes the beat weak and thin. Thus, to balance the bass range use Q value or broad bell for the fastness and warmth of the tracks. If you find audio engineering interesting then enroll yourself in any sound engineering courses in India.

Low mids (250 to 500 Hz):

Thirdly, this low mids range is one of the tricky ranges but has properties similar to bass. Too many low mids can cause the sound muffled and low range makes it hollow. So, use this range wisely. For example, if you want to boost the flatten sound pg guitar or drums make use of this range. It can make wonders while mixing them with guitars and improves the clarity of the mix. However, if your mix is already overpowering, then cutting them from the space is far better.

The frequency range is one of the essential factors in audio engineering and every audio engineer should know the fundamentals of the frequency. Tase – the best music production colleges in India helps you to understand the basics of sound and frequency effectively.